|
|
|
Salice Concealed Hinges
Salice Concealed Hinges
https://www.fit-nz.co.nz/core/media/media.nl?id=188590&c=4148197&h=Dn0Ts50TvSgG3FFzXuMCPfyt8M2ktteTTO4fvAFhL1k3bm4d
Designed and made in Italy, Salice hinges offer a solution for any application. The 200 series covers standard and crampon, plus special angles with full overlay, half overlay and inset options. Side adjustability provides market leading flexibility from -1.5 to +4.5mm. Salice's 700 Silentia series also provides a wide range, with the addition of integrated bumper-less soft close. Series 100 offers soft close on 105° full overlay range.
Why choose Salice over other brands? Here's 3 key reasons:
1. STREAMLINED - Salice’s soft close mechanism is in the bowl of the hinge, so a streamlined arm is retained, making for a more attractive aesthetic after installation.
2. ONE STEP ADJUSTMENT AFTER INSTALLATION - Salice is the ONLY hinge that retains the 2mm gap between door and cabinet carcass when you adjust the hinge; so adjustment is a one-step rather than a multi-step process.
3. EASIER RESTRICTOR CLIP ADDITION - the Salice restrictor clip (to limit door opening) can be added WITHOUT uninstalling the hinge. That makes for a much quicker and easier job. Find Out More About Salice's Extensive Range of Concealed Soft Close Hinges
Silentia Plus Series 100 45° Long Arm Soft Close
Silentia Plus Series 100 45° Long Arm Soft Close
For doors with special angles
Silentia Plus Series 100 – hinges with second generation soft close mechanism integrated into the hinge cup
Innovative switch within hinge to control deceleration action via two silicon-oil dampers
Bright nickel plated steel cup and arm
4.3kg capacity per hinge
ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates
45° LONG ARM HINGES
12mm deep metal cup
105° opening
Possible drilling distance on the door 3-6mm
Compatible with Domi mounting plates
Available in 45mm, 48mm, 52mm.
Available with Dowelled, Logica or Screw On cup types.
|
Silentia Plus Series 100 90° Blind Corner Soft Close
Silentia Plus Series 100 90° Blind Corner Soft Close
Silentia Plus Series 100 – hinges with second generation soft close mechanism integrated into the hinge cup
Innovative switch within hinge to control deceleration action via two silicon-oil dampers
Bright nickel plated steel cup and arm
4.3kg capacity per hinge
ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates
90° BLIND CORNER HINGES
12mm deep metal cup
105° opening
Possible drilling distance on the door 3-6mm
Compatible with Domi mounting plates
Available in 45mm, 48mm, 52mm.
Available with Dowelled, Logica or Screw On cup types.
|
Silentia Plus Series 100 105° Soft Close Full Overlay
Silentia Plus Series 100 105° Soft Close Full Overlay
Silentia Plus Series 100 – hinges with second generation soft close mechanism integrated into the hinge cup
Innovative switch within hinge to control deceleration action via two silicon-oil dampers
Bright nickel plated steel cup and arm
4.3kg capacity per hinge
ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates
105° HINGES
12mm deep metal cup
105° opening
Possible drilling distance on the door 3-6mm
Compatible with Domi mounting plates
Available in 45mm, 48mm, 52mm.
Available with Dowelled, Logica or Screw On cup types
|
Silentia Plus Series 700 155° Zero Protrusion Full Overlay
Silentia Plus Series 700 155° Zero Protrusion Full Overlay
Wide opening zero protrusion full overlay
Silentia Plus Series 700 – hinges with second generation soft close mechanism integrated into the hinge cup
Deceleration action via two silicon-oil dampers
Negative protrusion at 90° opening
Bright nickel plated steel cup and arm
4.3kg capacity per hinge
ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates
155° ZERO PROTRUSION FULL OVERLAY
13.5mm deep metal cup
155° opening
Possible drilling distance on the door 3-8mm
Compatible with Domi mounting plates
Available in 45mm, 48mm, 52mm.
Available with Dowelled, Logica or Screw On cup types.
|
Series 200 110° Full Overlay
Series 200 110° Full Overlay
Series 200 – an integrated hinge system designed to provide a solution for any situation requiring a concealed hinge
Bright nickel plated steel cup and arm ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates
110° HINGES
11mm deep metal cup
110° opening
Possible drilling distance on the door 3-6mm
Compatible with Domi mounting plates
Available in 45mm, 48mm and 52mm. Dowelled, Rapido and Logica cup types. |
Series 200 110° Half Overlay
Series 200 110° Half Overlay
Series 200 – an integrated hinge system designed to provide a solution for any situation requiring a concealed hinge
Bright nickel plated steel cup and arm ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates
110° HINGES
11mm deep metal cup
110° opening
Possible drilling distance on the door 3-6mm
Compatible with Domi mounting plates
Available in 45mm, 48mm and 52mm with dowelled cup type. |
Series 200 110° Inset
Series 200 110° Inset
Series 200 – an integrated hinge system designed to provide a solution for any situation requiring a concealed hinge
Bright nickel plated steel cup and arm ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates
110° HINGES
11mm deep metal cup
110° opening
Possible drilling distance on the door 3-6mm
Compatible with Domi mounting plates
Available in 45mm, 48mm and 52mm with dowelled cup type. |
Series 200 110° Reverse Sprung Push
Series 200 110° Reverse Sprung Push
Series 200 – an integrated hinge system designed to provide a solution for any situation requiring a concealed hinge
Bright nickel plated steel cup and arm ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates 110° REVERSE SPRUNG HINGES
11mm deep metal cup
110° opening
Possible drilling distance on the door 3-6mm
4.3kg capacity per hinge
Compatible with Domi mounting plates
Use with Salice Adjustable Mechanical Push System Available in Full Overlay and Inset, 45mm Screw On and Logica cup types. |
Series 200 155° Zero Protrusion
Series 200 155° Zero Protrusion
Series 200 – an integrated hinge system designed to provide a solution for any situation requiring a concealed hinge
Bright nickel plated steel cup and arm
Zero Protrusion MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates 155° HINGES
13.5mm deep metal cup
155° opening Possible drilling distance on the door 3-8mm
6mm negative projection at 90°
Possible drilling distance on the door 3-8mm
Compatible with traditional and Domi mounting plates Available in 45mm, 48mm and 52mm Dowelled types and 52mm Screw On type |
Series 200 165° Full Overlay
Series 200 165° Full Overlay
Series 200 – an integrated hinge system designed to provide a solution for any situation requiring a concealed hinge
Bright nickel plated steel cup and arm ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates
165° HINGES
11mm deep metal cup
165° opening
Possible drilling distance on the door 3-8mm
Compatible with traditional and Domi mounting plates
Available in 45mm, 48mm and 52mm.
Dowelled and Rapido cup types. |
Series 200 Bifold
Series 200 Bifold
Series 200 – an integrated hinge system designed to provide a solution for any situation requiring a concealed hinge
Bright nickel plated steel cup and arm ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates
BIFOLD HINGES
11mm deep diecast cup
35mm cup diameter
70° opening angle on first door
Possible drilling distance on the door 3-6mm
Compatible with traditional and Domi mounting plates
Available in 45mm, 48mm and 52mm. Dowelled and Rapido cup types. |
Series 200 Crampon Blind Corner
Series 200 Crampon Blind Corner
Series 200 – an integrated hinge system designed to provide a solution for any situation requiring a concealed hinge
Bright nickel plated steel cup and arm ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates BLIND CORNER
For cabinet sides with 37x32mm standard drilling
Hinges for minimum 18mm thick doors
94° opening
Possible drilling distance on the door 3-9mm
Compatible with traditional and Domi mounting plates
Available in 45mm, 48mm and 52mm
Dowelled and Rapido cup types |
Series 200 45°
Series 200 45°
Series 200 – an integrated hinge system designed to provide a solution for any situation requiring a concealed hinge
Bright nickel plated steel cup and arm ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates 45° HINGES
For wooden doors with positively angled assembly
Hinges for minimum 18mm thick doors
15.5mm deep cup
94° opening
Possible drilling distance on the door 3-9mm
Compatible with traditional and Domi mounting plates
Available in 45mm, 48mm and 52mm
Dowelled and Rapido cup types |
Series 700 155° Soft Close Full Overlay
Series 700 155° Soft Close Full Overlay
Series 700 – hinges with an integrated soft close mechanism in the hinge cup
Bright nickel plated steel cup and arm ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates
155° HINGES
13.5mm deep metal cup
155° opening
Possible drilling distance on the door 3-8mm
Minimum door thickness 16mm
Compatible with Domi mounting plates
Available in 45mm, 48mm, 52mm. Available with Dowelled or Logica cup types. This series has been marked for deletion. Please check with us regarding quantities if you are ordering in volume. Individual items will be removed from the website as stock sells out. |
Series 700 Soft Close Crampon Blind Corner
Series 700 Soft Close Crampon Blind Corner
Series 700 – hinges with an integrated soft close mechanism in the hinge cup
Bright nickel plated steel cup and arm ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates
CRAMPON BLIND CORNER HINGES
13.5mm deep metal cup
110° opening
Possible drilling distance on the door 3-6mm
For wooden doors with positive angled assembly
Minimum door thickness 16mm
For cabinet sides with 37x32 standard drilling
Compatible with Domi mounting plates
Available in 45mm, 48mm, 52mm.
Available with Dowelled or Logica cup types. This series has been marked for deletion. Please talk to us regarding quantities if you are ordering in volume. Individual items will be removed from the website as stock sells out. |
Series 700 45° Soft Close
Series 700 45° Soft Close
Series 700 – hinges with an integrated soft close mechanism in the hinge cup
Bright nickel plated steel cup and arm ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates
45° HINGES
13.5mm deep metal cup
Possible drilling distance on the door 3-6mm
For wooden doors with positive angled assembly
Minimum door thickness 16mm
Compatible with Domi mounting plates
Available in 45mm, 48mm, 52mm.
Available with Dowelled or Logica cup types. This series has been marked for deletion. Please check with us regarding quantities if you are ordering in volume. Individual items will be removed from the website as stock sells out. |
Cruciform Domi Mounting Plate Steel Euro Screw
Cruciform Domi Mounting Plate Steel Euro Screw
Cruciform Domi snap on mounting plates
37x32mm drilling
Compatible with Salice Series 100, Series 200 and Series 700 Silentia hinges
Steel
Euroscrew fixing
Drilling Ø5x11mm
Available in 0mm and 3mm.
|
Cruciform Domi Mounting Plate Steel Expanding Dowel
Cruciform Domi Mounting Plate Steel Expanding Dowel
Cruciform Domi snap on mounting plates
37x32mm drilling
Compatible with Salice Series 100, Series 200 and Series 700 Silentia hinges
Steel
Expanding dowel fixing (5mm dowel)
Drilling Ø5x7.5mm
Available in 0mm and 3mm.
|
Cruciform Domi Mounting Plate Die Cast Euro Screw
Cruciform Domi Mounting Plate Die Cast Euro Screw
Cruciform Domi snap on mounting plates
37x32mm drilling
Compatible with Salice Series 100, Series 200 and Series 700 Silentia hinges
Diecast
Euroscrew fixing
Drilling Ø5x11mm
Available in 0mm, 3mm, 4mm, 6mm and 9mm.
|
Cruciform Domi Mounting Plate Die Cast Expanding Dowel
Cruciform Domi Mounting Plate Die Cast Expanding Dowel
Cruciform Domi snap on mounting plates
37x32mm drilling
Compatible with Salice Series 100, Series 200 and Series 700 Silentia hinges
Diecast
Expanding dowel fixing (5mm dowel)
Drilling Ø5x11mm
Available in 0mm, 3mm, 4mm and 6mm |
Restrictor Clip & Hinge Cover
Restrictor Clip & Hinge Cover
Restrictor Clip
Stop device to limit door opening to 86 degrees, +/- 1 degree
Suits all hinges with 94 degree or 110 degree opening and 35mm cup diameter
Ideal for preventing corner cabinet doors from opening into, and damaging, appliances and other cabinets
Hinge Covers
Steel with embossed Salice logo One for hinge arm (S2MX83H9SN) and one for hinge head (SAL135)
Suit all Salice hinges from Series 100, 200 and 700 |
|
4 Reasons To Choose Soft Close Hinges
Cabinetry is one of the most substantial costs in a new kitchen or kitchen renovation and, sadly, also one of the first things to start showing wear and tear from the rigours of busy families. How can soft close hinges help? They slow down the speed at which cupboard doors close, making the last part of the closing action slow and gentler. Less crashing into cabinet side panels and less force on the doors and hinges extends the life of your cabinets and doors, keeping them looking smarter for longer.
When you're busy, perhaps even a bit stressed, excessive noise can be the last straw. Many kitchens and living areas are doubling as work and study spaces so cabinet doors banging closed can be quite a disruption. Soft close hinges can virtually eliminate that annoying noise.
The investment pays off. We've already covered extending the life of your cabinetry, which in itself makes investing in soft close hinges worthwhile. In addition, savvy buyers look for a kitchen that's in good nick with quality finishing touches so if you're renovating for resale, investing in soft close hinges will both keep your kitchen looking smart and send a message to buyers that your property has been carefully looked after.
Last but by no means least, soft close hinges are simply safer for little ones. Because soft close hinges slow down the last part of the door closing action, there's more time for the kids (or grandkids) to get their fingers out of the way. And, if the door does make contact, its action is slower and gently and the 'ouch' won't be as bad.
|
|
|
|
