|
|
|
DOMUS Line 24Vdc Strip Lighting - Flexyled HE (High Emission) CH
http://www.fit-nz.co.nz/CH-24Vdc-LED-Strip-Lighting-Rolls-1-250x220_2.jpg
DOMUS LINE™ 24Vdc Flexyled CH LED strip features an innovative clip system that connects various LED strip lengths together quickly and easily without the use of soldering or tools. The connecting clip allows a strip to be constructed in almost any configuration up to 6m long. You can cut this LED strip in lengths to fit your needs from 5m or 20m rolls, in handy 5cm increments. Perfect for surface and embedded installation and with DOMUS LINE™ aluminium lighting profiles. It's also available in pre-cut lengths with a power cable already attached.
|
CH 24Vdc LED Strip Lighting Cut Length & Attached Power Cable
Domus Line FlexyLED HE (High Emission) CH Flexible Linear Strip Lighting
Designed in Italy to comply with Australian/New Zealand standards
Suitable for surface installation or to be integrated into profiles
Chained flexi LED strips with adhesive; maximum 6 lineal metres in one run
Highly resistant double sided adhesive backing strip provides fast and simple installation without the need for tools
Fully compatible with Domus Line 24Vdc sensors switches and power supplies
FlexyLED CH is available in rolls or alternatively in precut strips with power cable already attached
FlexyLED CH is designed to connect various lengths of LED strip light together with an innovative solderless clips system
Connecting clip allows strips to be constructed in virtually any configuration up to 6m long
Simply cut to length, in 50mm increments, and clip together to complete your installation
To join, slide LED strip under contacts on clip, align + and – markings and snap clip closed
IP20 protected against solid foreign objects greater than 12.55mm (eg fingers)
Not protected against water ingress
High performance SMD LED chip with 85lm/W and no visible dots
Separate interconnecting cable (100mm) for HE CH strips enables breaks in lighting stream without having to run additional power cable.
A separate power supply cable is required for each unbroken run of FlexyLED HE CH modules.
Order LED Drivers separately.
For each 15W on LED Driver, approximately 1.5 lineal metres of 24Vdc FlexyLED CH may be run .
eg 30W LED Driver runs up to 3 lineal metres of 24Vdc FlexyLED CH.
Do not exceed 6m in any one run.
FlexyLED HE CH rolls and strips 120 LEDs / 9.6W per metre
FlexyLED HE CH rolls available in 2 lengths: 5m and 20m
FlexyLED HE CH strips with power cable attached available in 2 lengths: 2m and 3m
FlexyLED HE CH rolls and strips available in Natural White and Warm White light colours
|
|
CH 24Vdc LED Strip Lighting Interconnector, Cables & Clips
Domus Line Interconnecting Cable, Power Cord and Connecting Clip for FlexyLED High Emission (24Vdc) CH Flexible Linear Strip Lighting
Designed in Italy to comply with Australian/New Zealand standards
|
|
CH 24Vdc LED Strip Lighting Rolls
Domus Line FlexyLED HE (High Emission) CH Flexible Linear Strip Lighting
Designed in Italy to comply with Australian/New Zealand standards
Suitable for surface installation or to be integrated into profiles
Chained flexi LED strips with adhesive; maximum 6 lineal metres in one run
Highly resistant double sided adhesive backing strip provides fast and simple installation without the need for tools
Fully compatible with Domus Line 24Vdc sensors switches and power supplies
FlexyLED CH is available in rolls or alternatively in precut strips with power cable already attached
FlexyLED CH is designed to connect various lengths of LED strip light together with an innovative solderless clips system
Connecting clip allows strips to be constructed in virtually any configuration up to 6m long
Simply cut to length, in 50mm increments, and clip together to complete your installation
To join, slide LED strip under contacts on clip, align + and – markings and snap clip closed
IP20 protected against solid foreign objects greater than 12.55mm (eg fingers)
Not protected against water ingress
High performance SMD LED chip with 85lm/W and no visible dots
Separate interconnecting cable (100mm) for HE CH strips enables breaks in lighting stream without having to run additional power cable.
A separate power supply cable is required for each unbroken run of FlexyLED HE CH modules.
Order LED Drivers separately.
For each 15W on LED Driver, approximately 1.5 lineal metres of 24Vdc FlexyLED CH may be run.
eg 30W LED Driver runs up to 3 lineal metres of 24Vdc FlexyLED CH.
Do not exceed 6m in any one run.
FlexyLED HE CH rolls and strips 120 LEDs / 9.6W per metre
FlexyLED HE CH rolls available in 2 lengths: 5m and 20m
FlexyLED HE CH strips with power cable attached available in 2 lengths: 2m and 3m
FlexyLED HE CH rolls and strips available in Natural White and Warm White light colours
|
|
|
|
|
|
