|
Domus Line 24Vdc Strip Lighting - Flexyled HE (High Emission) CR
Domus Line 24Vdc Strip Lighting - Flexyled HE (High Emission) CR
https://www.fit-nz.co.nz/CR-24Vdc-LED-Strip-Lighting-Modules-250x220.jpg
Like the 12Vdc version, the 24Vdc LED strip from Domus Line is a highly innovative product in flexible linear LED strip lighting. It comprises straight line and 90° corner modules with a quick plug system; no soldering equipment required! Highly resistant double sided adhesive backing strip makes for fast and tool-less installation. It's ideal for both surface and embedded installation with cabinets and toekicks and with Domus Line aluminium lighting profiles.
Browse Fit's LED Range from DOMUS LINE of Italy
CR 24Vdc LED Strip Lighting Corner Modules
CR 24Vdc LED Strip Lighting Corner Modules
Domus Line LED Flexible Linear Strip Lighting Made in Italy to comply with Australian/New Zealand standards Suitable for surface and integration into lighting profiles Fully compatible with Domus Line sensors, switches and power supplies Flexible strip with highly reflective white backing High transparent resin coating protects LEDs from mild mechanical shock and is IP44 protected against water splashes 3M highly resistant, adhesive backing tape for fast installation on virtually any smooth surface FlexyLED CR provides a universal strip lighting system without need for soldering equipment
High performance SMD LED chip with static light (NO DOT effect) and with 85lm/W Innovative quick plug system allows units of different lengths and 90° corners to be joined together to suit almost any situation Connection system ensure consistency in spacing between individual LED chips, even at joins, to maintain consistent, even light projection and no shadowed areas Modules can be cut every 50mm (6 LEDs) allowing you to custom build your installation Maximum continuous run length: 6m per any one strip. Multiple lengths may be run from a distributor block providing driver capacity is sufficient.
FlexyLED CR modules (strips) 120 LEDs / 9.6W per metre FlexyLED CR corner modules 6 LEDs, 0.48W FlexyLED CR modules available in 3 lengths: 500mm (4.8W), 1000mm (9.6W), 2000mm (19.2W) FlexyLED CR corner modules available in Left Hand and Right Hand options FlexyLED CR strips and corner modules available in Natural White and Warm White light colour
Interconnecting cables fitted with CR connectors are available in 500mm lengths. These enable breaks in lighting stream without having to run additional power cable. A separate power supply cable is required for each unbroken run of FlexyLED CR modules. A 2m power cord is sold separately and is required to connect power from the driver to the HE CR light strip. The power cord is fitted with CR and Micro24 connectors.
Don't forget! Order LED Drivers separately. For each 15W on LED Driver, approximately 1.5 lineal metres of 24Vdc FlexyLED CH may be run. eg 30W LED Driver runs up to 3 lineal metres of 24Vdc FlexyLED CH. Do not exceed 6m in any one run. LED drivers with 2m input lead and 500mm output cord with 10way Micro24 female distributor
This range is being phased out and is priced accordingly. Individual items will be removed from the website as stock is old out. Please contact us to check quantities.

|
CR 24Vdc LED Strip Lighting Modules
CR 24Vdc LED Strip Lighting Modules
Domus Line LED Flexible Linear Strip Lighting Made in Italy to comply with Australian/New Zealand standards Suitable for surface and integration into lighting profiles Fully compatible with Domus Line sensors, switches and power supplies Flexible strip with highly reflective white backing High transparent resin coating protects LEDs from mild mechanical shock and is IP44 protected against water splashes 3M highly resistant, adhesive backing tape for fast installation on virtually any smooth surface FlexyLED CR provides a universal strip lighting system without need for soldering equipment
High performance SMD LED chip with static light (NO DOT effect) and with 85lm/W Innovative quick plug system allows units of different lengths and 90° corners to be joined together to suit almost any situation Connection system ensure consistency in spacing between individual LED chips, even at joins, to maintain consistent, even light projection and no shadowed areas Modules can be cut every 50mm (6 LEDs) allowing you to custom build your installation Maximum continuous run length: 6m per any one strip. Multiple lengths may be run from a distributor block providing driver capacity is sufficient.
FlexyLED CR modules (strips) 120 LEDs / 9.6W per metre FlexyLED CR corner modules 6 LEDs, 0.48W FlexyLED CR modules available in 3 lengths: 500mm (4.8W), 1000mm (9.6W), 2000mm (19.2W) FlexyLED CR corner modules available in Left Hand and Right Hand options FlexyLED CR strips and corner modules available in Natural White and Warm White light colour
Interconnecting cables fitted with CR connectors are available in 500mm lengths. These enable breaks in lighting stream without having to run additional power cable. A separate power supply cable is required for each unbroken run of FlexyLED CR modules. A 2m power cord is sold separately and is required to connect power from the driver to the HE CR light strip. The power cord is fitted with CR and Micro24 connectors.
Don't forget! Order LED Drivers separately. For each 15W on LED Driver, approximately 1.5 lineal metres of 24Vdc FlexyLED CR may be run. eg 30W LED Driver runs up to 3 lineal metres of 24Vdc FlexyLED CR. LED drivers with 2m input lead and 500mm output cord with 10way Micro24 female distributor
This range is being phased out and is priced accordingly. Individual items will be removed from the website as stock is old out. Please contact us to check quantities.

|
CR 24Vdc LED Strip Lighting Interconnector & Cables
CR 24Vdc LED Strip Lighting Interconnector & Cables
Interconnecting cables and power cords for DOMUS Line 24Vdc HE CR flexible LED strip lighting Made in Italy to comply with Australian/New Zealand standards
Interconnecting cables fitted with CR connectors are available in 500mm lengths. These enable breaks in lighting stream without having to run additional power cable.
A separate power supply cable is required for each unbroken run of FlexyLED CR modules. A 2m power cord is sold separately and is required to connect power from the driver to the HE CR light strip. The power cord is fitted with CR and Micro24 connectors.
LED drivers to be ordered separately. LED drivers with 2m input lead and 500mm output cord with 10way Micro24 female distributor This range is being phased out and is priced accordingly. Individual items will be removed from the website as stock is old out. Please contact us to check quantities.
|
|
5 Reasons To Choose LED Lighting
LED lights use up to 80% less energy than standard incandescent light bulbs (Electricity in New Zealand, Electricity Authority, 2016) and will last for thousands of hours. This makes LED lights ideal for hard to reach places, where replacing them can be difficult and/or dangerous.
LED lights can last for many thousands of hours. Because they don't need to be replaced as often as other lights, they're great for hard to reach or hard to access places.
LED lights do not suddenly fail, rather they fade over time, and frequent on/off switching does not impact on their lifespan, so they are excellent for busy areas like kitchens.
LED lights generate very little heat so can be recessed into furniture and cabinets or be used to light artwork without damage. They are also safer than traditional lights as they will stay cool to touch even after several hours of usage.
LED lights have a robust design, making them far sturdier and more durable than traditional light bulbs. Since LEDs don’t use fragile components such as glass and filaments, LEDs are able to withstand shock, vibration and extreme temperature.
|
|
|
|