Domus Line LED Flexible Linear Strip Lighting Made in Italy to comply with Australian/New Zealand standards Suitable for surface and integration into lighting profiles Fully compatible with Domus Line sensors, switches and power supplies Flexible strip with highly reflective white backing High transparent resin coating protects LEDs from mild mechanical shock and is IP44 protected against water splashes Maximum of 6 lineal metres per run
3M highly resistant, adhesive backing tape for fast installation on virtually any smooth surface FlexyLED CR provides a universal strip lighting system without need for soldering equipment
High performance SMD LED chip with static light (NO DOT effect) and with 85lm/W Innovative quick plug system allows units of different lengths and 90° corners to be joined together to suit almost any situation Connection system ensure consistency in spacing between individual LED chips, even at joins, to maintain consistent, even light projection and no shadowed areas Modules can be cut every 50mm (6 LEDs) allowing you to custom build your installation
FlexyLED CR modules (strips) 120 LEDs / 9.6W per metre FlexyLED CR corner modules 6 LEDs, 0.48W FlexyLED CR modules available in 3 lengths: 500mm (4.8W), 1000mm (9.6W), 2000mm (19.2W) FlexyLED CR corner modules available in Left Hand and Right Hand options FlexyLED CR stips and corner modules available in Natural White and Warm White light colour
Interconnecting cables fitted with CR connectors are available in 500mm lengths. These enable breaks in lighting stream without having to run additional power cable. A separate power supply cable is required for each unbroken run of FlexyLED CR modules. A 2m power cord is sold separately and is required to connect power from the driver to the HE CR light strip. The power cord is fitted with CR and Micro24 connectors.
Order LED Drivers separately. For each 15W on LED Driver, approximately 1.5 lineal metres of 24Vdc FlexyLED CR may be run. eg 30W LED Driver runs up to 3 lineal metres of 24Vdc FlexyLED CR. Do not exceed 6m in any one run. LED drivers with 2m input lead and 500mm output cord with 10way Micro24 female distributor