What does D-Motion Dual Colour mean?
Domus Line's D-Motion Dual Colour LED allows you to select Natural White or Warm White colour in one product.

For kitchen makers, cabinet makers and joiners, you'll no longer need to stock two light colour variants, so if you hold LED stock you'll have less funds tied up.
For homeowners, you can trial light colours in situ after installation and choose the one you prefer, or alter it any time to suit your mood and vibe.
Whether you're a designer, a maker or a homeowner, D-Motion puts the power in your hands!

Giro D-Motion brings all the flexibility and function of the original Giro to the D-Motion range.

24Vdc
72W
Remote control with 15m of working area
Receiver wiring in: 200mm Micro24 male
Receiver wiring out: 6 x Micro24 female
Wireless control system consisting of a single channel RF remote control with a replaceable battery and a receiver unit.
For D-Motion Dual Colour luminaires, GIRO D-Motion can be used to switch between light colour and to control dimming.

Use on/off button for power, resetting brightness and progressive brightness adjustment.
Use lower button for D-Motion features:
* Controlling multiple lights with one switch system
* Switching between light colour and control dimming
* Pairing with up to 6 GIRO switches
* Works with up to 4 individual remote controls operating the same lighting

Control Module: Wired for a cable for connection to 24Vdc supply with 6 Micro24 female connectors and a lit configuration button
Remote Control: 2 buttons and indicator light in middle. Can be used to switch all D-Motion Dual Colour luminaires connected to the receiver on and off and to control brightness. Step and dynamic modes.

How the GIRO D-Motion Remote Control System Works
Advanced Lighting Management
GIRO D-Motion allows for highly customisable lighting control. It can be used to configure lighting systems with multiple control units creating a ‘primary and secondary’ hierarchical structure for flexible remote control.
Multi Receiver Configuration
GIRO D-Motion allows each control unit a clearly defined role: the ‘primary’ control unit takes over the main function, coordinating the lighting system as a whole. The ‘secondary’ control units obey the instructions of the ‘primary’, ensuring perfect synchronisation of the
devices. This hierarchical approach provides detailed control over the lighting, and allows the space to be sectioned into areas, each with its own mood.
Multi Transmitter Configuration
Systems can also be configured with a single control unit or a group of control units controlled by two or more remote control (up to 4).

Available as remote/receiver set
Remote and receiver also available separately