|
|
|
RGB 12Vdc LED Strip Lighting Remote Sequencer
Domus Line Sequencer & Remote Controller for FlexyLED RGB Colour Change Flexible Linear LED Strip Lighting Made in Italy to comply with Australian/New Zealand standards Remote can control multiple sequencers Not synchronisable in multi sequencer installations Requires separate 12V dc LED driver as power supply. Click here. Sequencing options include: increasing/decreasing colour brightness, increasing/decreasing change speed, 8 static colours (red, green, blue, white, orange, yellow, cyan, pink), random colour changes, 3 colour step change, 7 colour step change, 2 colour fade change, 7 colour fade change, 7 colour flash
|
Pozi Driver Bits No.1
Pozi Driver Bits No.1 Superior quality driver bits
Premium quality S2 raw material
Full body hardness for longer life
Magnetised
Available in 25mm, 50mm, 75mm and 150mm
|
Icy Profile for LED Lighting
Made in Italy to comply with Australian/New Zealand standards
LED recessed profile
Supplied in 3m lengths
Aluminium finish
Symmetrical projection profile
12mm deep recessed installation
Smart fitting system with lateral pressure steel clip; allows quick installation with no glueing and easy removal if required
Can take Flexyled RGB strip
Ideal for undershelf and inside wardrobe installation
Blind or through milled groove installation Profile only. (No light source included. Suitable light source such as Flexyled CH must be purchased separately.)
Order Diffuser Screen, End Caps and Fixing Springs separately
|
Series 700 Soft Close Crampon
Series 700 – hinges with an integrated soft close mechanism in the hinge cup
Bright nickel plated steel cup and arm ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates
CRAMPON HINGES
13.5mm deep metal cup
110° opening
Possible drilling distance on the door 3-6mm
For wooden doors with positive angled assembly
Minimum door thickness 16mm
For cabinet sides with 37x32 standard drilling
Compatible with Domi mounting plates
Available in 45mm, 48mm, 52mm.
Available with Dowelled or Logica cup types.
|
Hardwood Dowel 6mm
High quality European Beech hardwood dowels
Pregrooved and cut to length
Supplied in handy 5kg sacks, that are easy to use and manoeuvre around your joinery shop or workshop
Available in 5mm, 6mm, 8mm, 9.5mm 10mm and 12mm diameters and a wide variety of lengths
Grouped by diameter. This group: 6mm 6mm diameter available in 30mm length only
|
Phillips No. 2 Driver Bits
Superior quality driver bits
Premium quality S2 raw material
Full body hardness for longer life
Magnetised
Double ended
Phillips No 2 plus Square Drive No 2 Available in 50mm and 89mm lengths
|
Sylent for Impaz Runners
Harn Sylent Dampener Attachment for standard roller drawer runners
Comes with mounting instructions
25kg load capacity dampener
|
Salice Push to Open System - Mechanical
Adjustable self-opening mechanical push system for handleless doors
Designed and manufactured in Italy Release device (SAL241 or SAL242) can be fitted to top, base or side panel of cabinet
Retaining catch (SAL243 or SAL244) can be fitted to back of cabinet door by pressure fixing or screw fixing
For doors over 1600mm wide, recommend using two mechanical release catches
These systems operate with Salice reverse sprung hinges. RELEASING DEVICES
SAL241 has an assembly stop device
SAL242 has depth adjustment facility with range of -1mm to +2.5mm, controlled by small adjustor wheel at back of adaptor and a sideways adjustment of ±2mm achieved by loosening fixing screws and adjusting adaptor position then retightening screws. RETAINING CATCHES
SAL243 for wood doors, knock in type
SAL244 for wood doors, screw on type
|
Series 200 110° Full Overlay
Series 200 – an integrated hinge system designed to provide a solution for any situation requiring a concealed hinge
Bright nickel plated steel cup and arm ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates
110° HINGES
11mm deep metal cup
110° opening
Possible drilling distance on the door 3-6mm
Compatible with Domi mounting plates
Available in 45mm, 48mm and 52mm. Dowelled, Rapido and Logica cup types.
|
Cruciform Domi Mounting Plate Die Cast Euro Screw
Cruciform Domi snap on mounting plates
37x32mm drilling
Compatible with Salice Series 100, Series 200 and Series 700 Silentia hinges
Diecast
Euroscrew fixing
Drilling Ø5x11mm
Available in 0mm, 3mm, 4mm, 6mm and 9mm.
|
Impaz Internal Brackets - T Drawers 117mm
HARN IMPAZ Internal Fixing Brackets 117mm
Suits Harn Impaz Standard Drawer - T Type
White
Sold as eaches
Available in Left Hand and Right Hand options
|
Ryfix E-Fix - Rimmed
E-Fix rimmed dowels and connectors
Facilitate 2-piece cam and dowel joining method with inherent strengths
Allows both knock down and placement assembly
|
CH 12Vdc LED Strip Lighting Rolls
Domus Line FlexyLED CH Flexible Linear Strip Lighting
Made in Italy to comply with Australian/New Zealand standards
Suitable for surface and embedded installation
Fully compatible with Domus Line 12v DC sensors switches and power supplies
FlexyLED CH is available in rolls or alternatively in precut strips with power cable already attached
FlexyLED CH is designed to connect various lengths of LED strip light together with an innovative solderless clips system
Connecting clip allows strips to be constructed in virtually any configuration up to 6m long
Simply cut to length, in 50mm increments, and clip together to complete your installation
To join, slide LED strip under contacts on clip, align + and – markings and snap clip closed
Highly resistant double sided adhesive backing strip provides fast and simple installation without the need for tools
IP20 protected against solid foreign objects greater than 12.55mm (eg fingers)
Not protected against water ingress
High performance LED chip with 87lm/W
Interconnecting cables for CH strips are available in 2 lengths. These enable breaks in lighting stream without having to run additional power cable.
A separate power supply cable is required for each unbroken run of FlexyLED CH modules.
Order LED Drivers separately. For each 15W on LED Driver, 3 lineal metres of FlexyLED CH may be run eg 30W LED Driver runs up to 6 lineal metres of FlexyLED CH
FlexyLED CH rolls and strips 60 LEDs / 4.8W per metre
FlexyLED CH rolls available in 2 lengths: 5m and 20m
FlexyLED CH strips with power cable attached available in 2 lengths: 2m and 3m
FlexyLED CH rolls and strips available in Natural White and Warm White light colours
|
Series 700 155° Soft Close Full Overlay
Series 700 – hinges with an integrated soft close mechanism in the hinge cup
Bright nickel plated steel cup and arm ADJUSTMENTS
Compensating side adjustment from -1.5mm to +4.5mm
Height adjustment +/- 2mm
Depth adjustment with Domi snap on mounting plates from -0.5mm to +2.8mm
Anti-sliding safety stop
MOUNTING PLATES
Bright nickel plated steel or diecast
Snap on assembly on Domi mounting plates
155° HINGES
13.5mm deep metal cup
155° opening
Possible drilling distance on the door 3-8mm
Minimum door thickness 16mm
Compatible with Domi mounting plates
Available in 45mm, 48mm, 52mm. Available with Dowelled or Logica cup types.
|
12 & 24 Module Kits
Complete module sets of either 12 or 24 modules for Echelon Wine Storage System
Satin anodised aluminium
|
RGB 12Vdc LED Strip Lighting Interconnector & Power Cables
Domus Line Interconnecting Cable for FlexyLED RGB Colour Change Flexible Linear LED Strip Lighting
Made in Italy to comply with Australian/New Zealand standards
Connects 2 lengths of FlexyLED RGB strip via a wire
Allows for corners, gaps etc
MicroRGB Connectors
Available in 2 lengths – 100mm and 500mm
|
CR 12Vdc LED Strip Lighting Modules
Domus Line LED Flexible Linear Strip Lighting
Made in Italy to comply with Australian/New Zealand standards
Suitable for surface and embedded installation
Fully compatible with Domus Line 12v DC sensors switches and power supplies
Flexible strip with highly reflective white backing
3M adhesive backing tape for fast installation on virtually any smooth surface
Durable against moderate mechanical shock thanks to a transparent resin coating
FlexyLED CR provides a universal strip lighting system without need for soldering equipment
IP44 protected against water splashes
High performance LED chip with 87lm/W
Innovative quick plug system allows units of different lengths and 90° corners to be joined together to suit almost any situation
Connection system ensure consistency in spacing between individual LED chips, even at joins, to maintain consistent light projection and no shadowed areas
Modules can be cut every 50mm allowing you to custom build your installation FlexyLED CR modules (strips) 60 LEDs / 4.8W per metre
FlexyLED CR corner modules 6 LEDs, 0.48W
FlexyLED CR modules available in 4 lengths: 250mm, 500mm, 1000mm, 2000mm
FlexyLED CR corner modules available in Left Hand and Right Hand options
FlexyLED CR stips and corner modules available in Natural White and Warm White light colour Interconnecting cables fitted with CR connectors are available in 3 lengths. These enable breaks in lighting stream without having to run additional power cable. A separate power supply cable is required for each unbroken run of FlexyLED CR modules.
LED Drivers to be ordered separately. For each 15W on LED Driver, 3 lineal metres of FlexyLED CR may be run eg 30W LED Driver runs up to 6 lineal metres of FlexyLED CR
|
6 Gauge Ribbed Screws
Ryfix Inotech 6 gauge screws
Part thread
Ribbed surefast
Square drive Supplied in cartons of 1000
Price is per 1000 Available in 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2
|
Pan Head Screws
Pan Head Screws
|
Lift 700 Pull Out Wardrobe Rail
Ambos Lift 700 Pull Out Wardrobe Rail adjust to fit spaces from 750mm to 1150mm
15kg load capacity
Fittings shaped to fit around hinges
Adjustable width 750-1150mm
Aluminium coloured finish
Easily and fully fastens to “System 32” hole
Quality Italian designed and made fittings from Ambos, established since 1977 and supplier to more than 40 countries worldwide
|
Impaz Standard Brackets
Harn Impaz Drawer Brackets
Sold as eaches
Available in left hand and right hand types
Available in Screw Fix, Press In and Expansion types
|
|
|
|
|
| Results 1-50 of 85 |  | 1 | 2 |  |
| |
|
|
|
