|
|
|
Holesaws, Mandrels & Drills
http://www.fit-nz.co.nz/core/media/media.nl?id=188345&c=4148197&h=e63b2244dbb7f014d9dc
Pro-Fit TCT holesaws, holesaw adaptors and pilot drills; machine and masonry drill bits along with spearpoint bits and spade bits. Plus HSS twist drills in both metric and imperial sizes.
|
Holesaws
Pro-Fit Multipurpose TCT Holesaws
Cuts up to 5 times faster
Ideal for wood, pressed wood products, particle board, ceramic materials like wall tiles, plastic and soft stone materials, fibre cement sheeting, aluminium, plaster board
Fast and clean cutting
Deep slots for easy slug removal and fast chip clearance
Premium quality brazed tungsten carbide teeth
60mm cutting depth
Available in sizes from 16.0mm to 125.0mm
|
|
Holesaw Arbors & Pilot Drills
Holesaw Arbors and Pilot Drills to suit 14-30mm and 32-198mm Holesaws Options with Hex Shanks and SDS Shanks HSS Metric |
|
Holesaw Adaptors
Converts small arbors to large |
|
Twist Drill - Metric
Jobber drill - drills metal, wood, plastic
High speed steel
Fully ground M2 HSS increases drill life
Titanium Nitride coating reduces heat and increases lubricity for extended life
135° split point cuts faster and reduces wandering
Available in diameters from 1.0mm to 10mm
|
|
Twist Drill - Imperial
Jobber drill (imperial)
Drills metal, wood, plastic
High speed steel
Fully ground M2 HSS increases drill life
Titanium Nitride coating reduces heat and increases lubricity for extended life
135° split point cuts faster and reduces wandering
Available in diameters from 1/16" to 1/4", plus No 30 Double End and No 20 Double End
|
|
Machine Drill Bits
Drills for machines
All carbi-tool router bits or accessories available
Left hand and right hand in 5mm, 8mm and 10mm
Right hand available in 15mm, 20mm, 25mm, 26mm, 35mm and 40mm
|
|
Masonry Drill Bits
Professional quality rotary and impact drill bits for masonry
Multi purpose straight shank
For use on wood, metal, plastic, brick, tiles, ceramics, plasterboard and aerated concrete
Tungsten carbide tipped
Available from 3.0mm to 12.00mm diameter
|
|
Tungsten Spearpoint Bits
Spearpoint drills are ideal for drilling glass and tiles
Ideally used at low speed with water
Premium tungsten carbide tipped
Available from 3mm to 12mm diameter and from 65mm to 80mm length
|
|
Turbo-Bore Spade Bits
Double outside spur for a cleaner hole and reduced vibration
Unique twist design cuts faster than standard spade bits
Self centering design
1/4" hex shank
Available from 10mm (3/8") to 32mm (1 1/4") diameter
|
|
|
|
|
|
