|
|
|
Designer Kitchen Bin Pull Out 350mm
Designer Kitchen Bin Pull Out 350mm
https://www.fit-nz.co.nz/Tanova-Designer-Series-Kitchen-Bin-350mm-250x220.jpg
A range of Tanova Designer Series pull out waste bin configurations to suit your 350mm wide cabinet, the most common cabinet width. There's a multitude of model options here, some with short framework sides and some with tall sides that hide the buckets from view. Most of the 350mm models feature 2 buckets, sometimes with different sizes, though there are also some models with 3 buckets; think one for waste, one for composting and one for recyclables. Original Designer Series models, excluding Series 2, with 20L and/or 36L buckets carry the New Zealand Made licence.
Check Out Tanova Designer Series & Designer Series 2 Kitchen Bin Options for Your 350mm Cabinet
Systems for 350mm Cabinets - 2 or 3 Buckets
Systems for 350mm Cabinets - 2 or 3 Buckets
Designer Series pull out soft close kitchen waste bin option for your 350mm cabinet, with 2 or 3 buckets. 60kg load capacity super smooth running drawer slides for effortless opening and closing every time. Fully integrated cushioning system for consistently soft and quiet closing. Runners over-extend beyond edge of benchtop to allow for easy removal of rear buckets. Extruded aluminium side panel connecting drawer runner and top cover; gives increased framework rigidity for less twisting as you operate unit. Streamlined design for reduced grime buildup and easier cleaning. System frame made from powder coated electro-galv steel. Strong easy-clean cover which can be used as a shelf if mounted lower in cabinet. Standard drawer front connection with gallery rails allow for full 6-way adjustment. Comes with full sized template for a very quick and easy installation into your cabinet. Designed for 350mm cabinet size (external width using 16mm board). Short sided Buckets have sturdy handles for easy removal and to hold liners in place and a smooth interior surface for easy wiping  |
Systems for 350mm Cabinets - 2 Bucket - Full Sides
Systems for 350mm Cabinets - 2 Bucket - Full Sides
Designer Series pull out soft close kitchen waste bin options, with 2 buckets, for your 350mm cabinet.
60kg load capacity super smooth running drawer slides for effortless opening and closing every time.
Fully integrated cushioning system for consistently soft and quiet closing.
Runners over-extend beyond edge of benchtop to allow for easy removal of rear buckets.
Extruded aluminium side panel connecting drawer runner and top cover; gives increased framework rigidity for less twisting as you operate unit.
Streamlined design for reduced grime buildup and easier cleaning.
System frame made from powder coated electro-galv steel.
Strong easy-clean cover which can be used as a shelf if mounted lower in cabinet.
Standard drawer front connection with gallery rails allow for full 6-way adjustment.
Comes with full sized template for a very quick and easy installation into your cabinet.
Designed for 350mm cabinet size (external width using 16mm board).
Tall sided
Buckets have sturdy handles for easy removal and to hold liners in place and a smooth interior surface for easy wiping
 |
Systems for 350mm Cabinets - 1 Bucket
Systems for 350mm Cabinets - 1 Bucket
Designer Series pull out soft close kitchen waste bin option for your 350mm cabinet, with 1 bucket. These units hold the New Zealand Made licence. 60kg load capacity super smooth running drawer slides for effortless opening and closing every time. Fully integrated cushioning system for consistently soft and quiet closing. Runners over-extend beyond edge of benchtop to allow for easy removal of rear buckets. Extruded aluminium side panel connecting drawer runner and top cover; gives increased framework rigidity for less twisting as you operate unit. Streamlined design for reduced grime buildup and easier cleaning. System frame made from powder coated electro-galv steel. Strong easy-clean cover which can be used as a shelf if mounted lower in cabinet. Standard drawer front connection with gallery rails allow for full 6-way adjustment. Comes with full sized template for a very quick and easy installation into your cabinet. Designed for 350mm cabinet size (external width using 16mm board). Short sided Buckets have sturdy handles for easy removal and to hold liners in place and a smooth interior surface for easy wiping  |
Series 2 Systems for 350mm Cabinets - 2 Buckets
Series 2 Systems for 350mm Cabinets - 2 Buckets
Soft close and Soft Close with Push to Open models
Comes complete with Simlead D drawer (185mm), drawer back, base panel sides and buckets
Solid-steel powder coated frame with front-fixing points to provide support for the drawer front
Suits modular cabinet external width of 350mm (16mm board)
Tall sided frames
Metal top cover
70kg carrying capacity
Models in Classic White and in Umbra Grey/Charcoal combination
Models with 2x15L, 2x18L or 2x24L buckets
Supplied as a frame, buckets and drawer components with assembly instructions. Reasonable DIY skills an advantage for installation.
Click on individual models in the table below to see minimum height, width and depth info for cabinets.
|
Series 2 Systems for 350mm Cabinets - 1 Bucket
Series 2 Systems for 350mm Cabinets - 1 Bucket
These units carry the official New Zealand made licence
Soft close and Soft Close with Push to Open models
Comes complete with Simlead D drawer (185mm), drawer back, base panel sides and buckets
Solid-steel powder coated frame with front-fixing points to provide support for the drawer front
Suits modular cabinet external width of 350mm (16mm board)
Tall sided frames
Metal top cover
70kg carrying capacity
Models in Classic White and in Umbra Grey/Charcoal combination
Models with 1x20L or 1x36L bucket
Supplied as a frame, buckets and drawer components with assembly instructions. Reasonable DIY skills an advantage for installation.
Click on individual models in the table below to see minimum height, width and depth info for cabinets.
|
|
Why Choose Tanova Designer Series?
Fit’s range of Tanova pull out kitchen rubbish bins are space-efficient, hygienic and easy to clean. They stay out of sight, yet are easily accessed when needed. Tanova manufactures kitchen bins for a wide range of cabinet styles and that offer great functionality for sorting different kinds of kitchen waste, such as organics and recycling. With the Tanova range being so broad, and with soft close being standard on even the Simplex range, it can be tricky choosing the best model for your kitchen. So, what are the key factors that make Designer Series the right option for you?
Designer Series kitchen bins are built on a heavier duty runner (60kg), so if you need a robust load capacity, they're an excellent option. If you're keen on a streamlined look, with mechanical parts not being on display when the bin is open, Designer Series is for you! These bins have enclosed working parts and the bin sides are constructed with minimal nooks and crannies so they're easy to wipe down. If you wish to dedicate a larger cabinet to your kitchen bin and recycling buckets, then, again, Designer Series works for you as there are models for cabinets from 300mm wide all the way up to 800mm wide. Plus, while Simplex models are in practical grey, with the most popular models also available in white, ALL Designer Series models are available in both Umbra Grey/Charcoal colour and in Classic White option.
|
|
|
|
