|
|
|
Domus Line Cables, Drivers & Distribution Blocks
Domus Line Cables, Drivers & Distribution Blocks
https://www.fit-nz.co.nz/DOMUS-Line-Cables-Drivers-Distribution-Blocks-2025-250x220.jpg
Cables, drivers and distribution blocks for the Italian designed Domus Line LED lighting range, both 12Vdc and 24Vdc models. Browse Fit's LED Range from DOMUS LINE of Italy
12Vdc Extension Cables for LED Lighting
12Vdc Extension Cables for LED Lighting
Extension cables
Use for extending cable between LED driver distributor block and the light fitting.
12Vdc
Distributor block
Extension with 10 Micro12 sockets
Suitable for all 12Vdc DOMUS LINE LED lights These items have been marked for deletion. Please talk to us regarding quantities if you are ordering in volume. Individual items will be removed from the website as stock sells out. |
12Vdc LED Drivers for LED Lighting
12Vdc LED Drivers for LED Lighting
Fully approved to Australian/NZ standards
X-Drivers
X-Driver is a smart power supply for 12Vdc LED luminaires
240Vac
Supplied with 2000mm plug and play power cord
Available in 15W, 30W and 60W units. Note - see 24V section for 24Vdc driver options
|
24Vdc Extension Cables for LED Lighting
24Vdc Extension Cables for LED Lighting
Extension cables for extending cable between LED driver distributor block and the light fitting
Keep this cable to minimum length possible
24Vdc
Available in 1m and 2m options
Distributor block extension for 24Vdc lights
With 150mm cord and 10xMicro24 addendums and M24 male connector
|
24Vdc LED Drivers for LED Lighting
24Vdc LED Drivers for LED Lighting
LED drivers for DOMUS Line 24Vdc LED Lighting
Fully approved to Australian/NZ standards
X-Drivers
X-Driver is a smart power supply for 24Vdc LED luminaires 240Vac
Supplied with 2000mm plug and play power cord
Available in 30W, 60W and 96W units.
Note - see 12V section for 12Vdc driver options CM1-XD CM1-XD is a control module for Domus Line's X-Driver. It activates two outputs for infra-red switches and back of door sensors. It has various sensor / sensor accessory options which can be viewed in the Infrared Movement Sensor category: DOM792 IR Proximity Sensor (also requires DOM793 to work)
DOM793 Distributor (to be used with DOM792)
DOM794 IR Sensor
DOM795 PIR Sensor
DOM796 Surface Mount Support for DOM795 PIR Watch the video explainer in the image carousel for detailed info about CM1-XD.
|
|
5 Reasons To Choose LED Lighting
LED lights use up to 80% less energy than standard incandescent light bulbs (Electricity in New Zealand, Electricity Authority, 2016) and will last for thousands of hours. This makes LED lights ideal for hard to reach places, where replacing them can be difficult and/or dangerous.
LED lights can last for many thousands of hours. Because they don't need to be replaced as often as other lights, they're great for hard to reach or hard to access places.
LED lights do not suddenly fail, rather they fade over time, and frequent on/off switching does not impact on their lifespan, so they are excellent for busy areas like kitchens.
LED lights generate very little heat so can be recessed into furniture and cabinets or be used to light artwork without damage. They are also safer than traditional lights as they will stay cool to touch even after several hours of usage.
LED lights have a robust design, making them far sturdier and more durable than traditional light bulbs. Since LEDs don’t use fragile components such as glass and filaments, LEDs are able to withstand shock, vibration and extreme temperature.
|
|
|
|
