|
|
|
DOMUS Line Touch Switches
http://www.fit-nz.co.nz/core/media/media.nl?id=187017&c=4148197&h=570e1b865f12b0909639
Touch switches for the DOMUS LINE™ LED lighting range feature single touch operation, dimmer functionality, auto off after 18 hours continuous operation and turn on at previous setting. Options for 12Vdc and 24Vdc models.
|
TLD Surface Mounted Touch Sensors
Made in Italy to comply with Australian/New Zealand standards
Options operating at 12Vdc and options operating at 12Vdc-24Vdc.
Models for surface mounting and for recessed installation.
Click on individual models in the table below for further details on each model.
Touch dimmers with night light feature
Single touch to sensor activates system
Adjust intensity of light by holding finger on sensor
Brightness level is ‘memorized’ until next adjustment and lights automatically turn on at the last used luminosity level; ideal for showrooms etc
Must be connected in line between power supply and LED fittings
|
|
Capsens Concealed Sensor
Domus Line Concealed Electronic Capacitive Sensor
Designed in Italy to comply with Australian/New Zealand standards
Option operating at 12V and option operating at 12-24Vdc
Click on individual models in the table below for further details on each model.
Designed to be installed concealed behind most non-metallic compounds including wood, plastic, glass and many other transparent or opaque materials
Operated by lightly touching surface of material over concealed installation position of sensor
Intensity of connected LED lights may be adjusted by holding finger on ‘activation’ area
Brightness level is ‘memorized’ until next adjustment and lights automatically turn on at the last used luminosity level; ideal for showrooms etc
Activation area of 50mm
Maximum thickness of material behind which Capsens can be installed is 30mm for wood, 12mm for glass and 20mm for plastic
Must be connected in line between power supply and LED fittings
Automatically turns off after approximately 18 hours
|
|
Remote Sensor with Dimming Function
Wireless switch for installation embedded in wood panels
Remote command in radio frequency
Option operating at 12V and option operating at 12-24Vdc Click on individual models in the table below for further details on each model. Remote switch can be removed from setting |
|
Combo Sensor Wired Receiver Unit
Domus Line Combo Sensor
Designed in Italy to comply with Australian/New Zealand standards
Electronic proximity (limit) switch
Multiple photocells for LED devices at 12Vdc and 24Vdc
Can control 3 devices or 3 sets of devices connected to the same number of sensors, acting independently or in combination
Supplied with input cable and 3x150mm output cables
Equipped with polarised MiniPlug connectors, allowing connection of maximum load of 30W @ 12Vdc or 60W @ 24Vdc
Supplied for surface installation
For recessed installation, you must order both DOM751 and separate sensor DOM752 OR both DOM776 and separate sensor DOM777
Programmable with 3 operation combinations:
3 sensors, single activation
3 sensors, 2 activations
3 sensors, 3 individual activations (default) Click on individual models in the table below for further details on each model. |
|
|
|
|
|
