Switches, Sensors & Accessories

Domus Line Cables, Drivers & Distribution Blocks

Cables, drivers and distribution blocks for the Italian designed Domus Line LED lighting ranges.

Domus Line Touch Switches

Touch switches for the Domus Line LED lighting range feature single touch operation, dimmer functionality, auto off after 18 hours continuous operation and turn on at previous setting. Options for 12Vdc and 24Vdc models.

Domus Line Infrared Movement Sensors

IR electronic proximity and IFR temperature change/movement sensors for use with the Domus Line LED lighting range. 
Surface mounted and recessed options, all quick and safe to install.

Options operating at 12V and options operating at 12-24Vdc
Click on individual models in the table below for further details on each model.

CM1-XD

CM1-XD is a control module for Domus Line's X-Driver. It activates two outputs for infra-red switches and back of door sensors. It has various sensor / sensor accessory options which are listed below.

DOM792 IR Proximity Sensor (also requires DOM793 to work)
DOM793 Distributor (to be used with DOM792)
DOM794 IR Sensor
DOM795 PIR Sensor
DOM796 Surface Mount Support for DOM795 PIR

Domus Line Multiple Sensor Control Systems

How POLY Works

POLY is a multiple sensor electronic control system for LED lighting to allow switching of a common light source by up to three different switches.

DOM786 - POLY Electronic Control Module

The electronic control module, only 18 mm thick, is connected between the power supply and the 12Vdc or 24Vdc lamps and can host up to 3 sensors of the two Domus Line models available:

• DOM787 PIR Sensor for DOM786 and DOM797
• DOM788 IR Sensor for DOM786 and DOM797, Including Surface Mount Support

The control module integrates a set-up button with which the 2 different modes can be selected for the IR sensor. This can also be used as a dimmable touch switch.

The control module comes with factory set-up for the use of the IR sensor in door switch mode and the PIR motion sensor switch.

DOM797 - MINI POLY 

A multiple sensor electronic control system for LED lighting to allow switching of a common light source by up to 2 accommodating IR-1 sensors with end-stroke or ON-OFF and dimmer function, and PIR-1 or PIR-2 motion detection sensors. (Original POLY DOM786 allows for 3.) The control module is supplied with a default set-up for using back-of-door IR-1 (proximity) sensors.

Order the control unit (POLY or MINI POLY) then the appropriate sensor for your project.

DOM787 - PIR Motion Sensor
The PIR sensor for POLY switches on when there is movement inside the detection field and, after about 180 seconds with no movement, automatically switches off the lights connected to the control model, even if the door remains open.

DOM788 - IR Back of Door Proximity Sensor or Dimmable Touch Switch.

Also works with DOM844 Clud Control System.
The IR sensor for Poly - in limit-switch mode - turns on the lights when the door is opened. 
With the on-off and dimmer set up, the IR sensors are switched on and off and the brightness of the lights can be adjusted simply by moving a hand near the sensor.  
Recess installation or surface mount with use of support (included).

DOM844 - CLUD - a three channel electronic sensor control system for IR Door sensors

Domus Line Giro D-Motion Remote Control System for Dual Colour Lighting

What does D-Motion Dual Colour mean?
Domus Line's D-Motion Dual Colour LED allows you to select Natural White or Warm White colour in one product.

For kitchen makers, cabinet makers and joiners, you'll no longer need to stock two light colour variants, so if you hold LED stock you'll have less funds tied up.
For homeowners, you can trial light colours in situ after installation and choose the one you prefer, or alter it any time to suit your mood and vibe.
Whether you're a designer, a maker or a homeowner, D-Motion puts the power in your hands!

Giro D-Motion brings all the flexibility and function of the original Giro to the D-Motion range.

24Vdc
72W
Remote control with 15m of working area
Receiver wiring in: 200mm Micro24 male
Receiver wiring out: 6 x Micro24 female
Wireless control system consisting of a single channel RF remote control with a replaceable battery and a receiver unit.
For D-Motion Dual Colour luminaires, GIRO D-Motion can be used to switch between light colour and to control dimming.

Use on/off button for power, resetting brightness and progressive brightness adjustment.
Use lower button for D-Motion features:
* Controlling multiple lights with one switch system
* Switching between light colour and control dimming
* Pairing with up to 6 GIRO switches
* Works with up to 4 individual remote controls operating the same lighting

Control Module: Wired for a cable for connection to 24Vdc supply with 6 Micro24 female connectors and a lit configuration button
Remote Control: 2 buttons and indicator light in middle. Can be used to switch all D-Motion Dual Colour luminaires connected to the receiver on and off and to control brightness. Step and dynamic modes.

How the GIRO D-Motion Remote Control System Works
Advanced Lighting Management
GIRO D-Motion allows for highly customisable lighting control. It can be used to configure lighting systems with multiple control units creating a ‘primary and secondary’ hierarchical structure for flexible remote control.
Multi Receiver Configuration
GIRO D-Motion allows each control unit a clearly defined role: the ‘primary’ control unit takes over the main function, coordinating the lighting system as a whole. The ‘secondary’ control units obey the instructions of the ‘primary’, ensuring perfect synchronisation of the
devices. This hierarchical approach provides detailed control over the lighting, and allows the space to be sectioned into areas, each with its own mood.
Multi Transmitter Configuration
Systems can also be configured with a single control unit or a group of control units controlled by two or more remote control (up to 4).

Available as remote/receiver set
Remote and receiver also available separately
 

Domus Line Giro Remote Control System

24Vdc
72W
Receiver wiring in: 200mm Micro24 male
Receiver wiring out: 6 x Micro24 female
Wireless control system consisting of a single channel RF remote control with a replaceable battery and a receiver unit.
GIRO can be used to create configurations with multiple control units (up to 6) and to control the same unit with more than one remote control (up to 4).
Control Module: Wired for a cable for connection to 24Vdc supply with 6 Micro24 female connectors and a lit configuration button
Remote Control: 2 buttons and indicator light in middle. Can be used to switch all luminaires connected to the receiver on and off and to control brightness. Step and dynamic modes.

How the GIRO Remote Control System Works
Advanced Lighting Management
GIRO allows for highly customisable lighting control. It can be used to configure lighting systems with multiple control units creating a ‘primary and secondary’ hierarchical structure for flexible remote control.
Multi Receiver Configuration
GIRO allows each control unit a clearly defined role: the ‘primary’ control unit takes over the main function, coordinating the lighting system as a whole. The ‘secondary’ control units obey the instructions of the ‘primary’, ensuring perfect synchronisation of the
devices. This hierarchical approach provides detailed control over the lighting, and allows the space to be sectioned into areas, each with its own mood.
Multi Transmitter Configuration
Systems can also be configured with a single control unit or a group of control units controlled by two or more remote control (up to 4).