Switches, Sensors & Accessories

Domus Line Cables, Drivers & Distribution Blocks

Cables, drivers and distribution blocks for the Italian designed Domus Line LED lighting range, both 12Vdc and 24Vdc models.

Domus Line Touch Switches

Touch switches for the Domus Line LED lighting range feature single touch operation, dimmer functionality, auto off after 18 hours continuous operation and turn on at previous setting. Options for 12Vdc and 24Vdc models.

Domus Line Infrared Movement Sensors

IR electronic proximity and IFR temperature change/movement sensors for use with the Domus Line LED lighting range. 
Surface mounted and recessed options, all quick and safe to install.

Options operating at 12V and options operating at 12-24Vdc
Click on individual models in the table below for further details on each model.

Domus Line Multiple Sensor Control Systems

How POLY Works

POLY is a multiple sensor electronic control system for LED lighting to allow switching of a common light source by up to three different switches.

DOM786 - POLY Electronic Control Module
Module

The electronic control module, only 18 mm thick, is connected between the power supply and the 12Vdc or 24Vdc lamps and can host up to 3 sensors of the two Domus Line models available:

• DOM787 PIR Sensor for DOM786
• DOM788 IR Sensor for DOM786, Including Surface Mount Support

The control module integrates a set-up button with which the 2 different modes can be selected for the IR sensor. This can also be used as a dimmable touch switch.

The control module comes with factory set-up for the use of the IR sensor in door switch mode and the PIR motion sensor switch.

DOM797 - MINI POLY 

A multiple sensor electronic control system for LED lighting to allow switching of a common light source by up to 2 accommodating IR-1 sensors with end-stroke or ON-OFF and dimmer function, and PIR-1 or PIR-2 motion detection sensors. (Original POLY DOM786 allows for 3.) The control module is supplied with a default set-up for using back-of-door IR-1 (proximity) sensors.

Order the control unit (POLY or MINI POLY) then the appropriate sensor for your project.

DOM787 - PIR Motion Sensor
The PIR sensor for POLY switches on when there is movement inside the detection field and, after about 180 seconds with no movement, automatically switches off the lights connected to the control model, even if the door remains open.

DOM788 - IR Back of Door Proximity Sensor or Dimmable Touch Switch.

Also works with DOM844 Clud Control System.
The IR sensor for Poly - in limit-switch mode - turns on the lights when the door is opened. 
With the on-off and dimmer set up, the IR sensors are switched on and off and the brightness of the lights can be adjusted simply by moving a hand near the sensor.  
Recess installation or surface mount with use of support (included).

DOM844 - CLUD - a three channel electronic sensor control system for IR Door sensors