|
|
|
Domus Line Touch Switches
Domus Line Touch Switches
https://www.fit-nz.co.nz/core/media/media.nl?id=187017&c=4148197&h=uvMOzuMi2_4EZL_XhMvdTTqZwOJBfv5hrfnF0PXuVo5I4r5_
Touch switches for the Domus Line LED lighting range feature single touch operation, dimmer functionality, auto off after 18 hours continuous operation and turn on at previous setting. Options for 12Vdc and 24Vdc models. Browse Fit's LED Range from DOMUS LINE of Italy
TLD Touch Sensors
TLD Touch Sensors
Made in Italy to comply with Australian/New Zealand standards
Options operating at 12Vdc, at 24Vdc and options operating at both 12Vdc and 24Vdc.
Models for surface mounting and for recessed installation.
Click on individual models in the table below for further details on each model.
Touch dimmers with night light feature
Single touch to sensor activates system
Adjust intensity of light by holding finger on sensor
Brightness level is ‘memorized’ until next adjustment and lights automatically turn on at the last used luminosity level; ideal for showrooms etc
Must be connected in line between power supply and LED fittings
DOM774 has been marked for deletion and will be removed from the website when all stock has sold. Please talk to us before specifying/ordering. |
Capsens Concealed Sensor
Capsens Concealed Sensor
Designed in Italy to comply with Australian/New Zealand standards
Operating at 24Vdc
Designed to be installed concealed behind most non-metallic compounds including wood, plastic, glass and many other transparent or opaque materials
Operated by lightly touching surface of material over concealed installation position of sensor
Intensity of connected LED lights may be adjusted by holding finger on ‘activation’ area
Brightness level is ‘memorized’ until next adjustment and lights automatically turn on at the last used luminosity level; ideal for showrooms etc
Activation area of 50mm
Maximum thickness of material behind which Capsens can be installed is 30mm for wood, 12mm for glass and 20mm for plastic
Must be connected in line between power supply and LED fittings
Automatically turns off after approximately 18 hours |
Remote Sensor with Dimming Function
Remote Sensor with Dimming Function
Item DOM775
Wireless switch consisting of radio remote control (one channel or multi channel) and a receiver.
For installation embedded in panels
Easily turn lights off or on and/or control light intensity remotely.
Remote control signal activates control unit up to a maximum distance of about 15 metres.
Light level memory; comes on at level previously set.
Operates at 12Vdc and 24Vdc
Maximum load 36W at 12Vdc and 72W at 24Vdc
Comes with 2m power cable, receiver unit, distributor block, cable and remote control
Comes with Micro12 and Micro24 connectors |
|
5 Reasons To Choose LED Lighting
LED lights use up to 80% less energy than standard incandescent light bulbs (Electricity in New Zealand, Electricity Authority, 2016) and will last for thousands of hours. This makes LED lights ideal for hard to reach places, where replacing them can be difficult and/or dangerous.
LED lights can last for many thousands of hours. Because they don't need to be replaced as often as other lights, they're great for hard to reach or hard to access places.
LED lights do not suddenly fail, rather they fade over time, and frequent on/off switching does not impact on their lifespan, so they are excellent for busy areas like kitchens.
LED lights generate very little heat so can be recessed into furniture and cabinets or be used to light artwork without damage. They are also safer than traditional lights as they will stay cool to touch even after several hours of usage.
LED lights have a robust design, making them far sturdier and more durable than traditional light bulbs. Since LEDs don’t use fragile components such as glass and filaments, LEDs are able to withstand shock, vibration and extreme temperature.
|
|
|
|
