Domus Line FlexyLED CH Flexible Linear Strip Lighting 
Made in Italy to comply with Australian/New Zealand standards
Suitable for surface and embedded installation
Fully compatible with Domus Line 12v DC sensors switches and power supplies
FlexyLED CH is available in rolls or alternatively in precut strips with power cable already attached
FlexyLED CH is designed to connect various lengths of LED strip light together with an innovative solderless clips system
Connecting clip allows strips to be constructed in virtually any configuration up to 6m long
Simply cut to length, in 50mm increments, and clip together to complete your installation
To join, slide LED strip under contacts on clip, align + and – markings and snap clip closed
Highly resistant double sided adhesive backing strip provides fast and simple installation without the need for tools
IP20 protected against solid foreign objects greater than 12.55mm (eg fingers)
Not protected against water ingress
High performance LED chip with 87lm/W
Interconnecting cables for CH strips are available in 2 lengths. These enable breaks in lighting stream without having to run additional power cable.
A separate power supply cable is required for each unbroken run of FlexyLED CH modules.

Don't forget! Order LED Drivers separately.

For each 15W on LED Driver, 3 lineal metres of FlexyLED CH may be run 

eg 30W LED Driver runs up to 6 lineal metres of FlexyLED CH
FlexyLED CH rolls and strips 60 LEDs / 4.8W per metre
FlexyLED CH rolls available in 2 lengths: 5m and 20m
FlexyLED CH strips with power cable attached available in 2 lengths: 2m and 3m
FlexyLED CH rolls and strips available in Natural White and Warm White light colours
Maximum continuous run length: 6m per any one strip.
Multiple lengths may be run from a distributor block providing driver capacity is sufficient.

This range has been marked for deletion. Please talk to us regarding quantities if you are ordering in volume. Individual items will be removed from the website as stock sells out.