DOMUS Line 12Vdc Strip Lighting - Flexyled CR

CR 12Vdc LED Strip Lighting Modules

Domus Line LED Flexible Linear Strip Lighting
Made in Italy to comply with Australian/New Zealand standards
Suitable for surface and embedded installation
Fully compatible with Domus Line 12v DC sensors switches and power supplies
Flexible strip with highly reflective white backing
3M adhesive backing tape for fast installation on virtually any smooth surface
Durable against moderate mechanical shock thanks to a transparent resin coating
FlexyLED CR provides a universal strip lighting system without need for soldering equipment
IP44 protected against water splashes
High performance LED chip with 87lm/W
Innovative quick plug system allows units of different lengths and 90° corners to be joined together to suit almost any situation
Connection system ensure consistency in spacing between individual LED chips, even at joins, to maintain consistent light projection and no shadowed areas
Modules can be cut every 50mm allowing you to custom build your installation

FlexyLED CR modules (strips) 60 LEDs / 4.8W per metre
FlexyLED CR corner modules 6 LEDs, 0.48W
FlexyLED CR modules available in 4 lengths: 250mm, 500mm, 1000mm, 2000mm
FlexyLED CR corner modules available in Left Hand and Right Hand options
FlexyLED CR stips and corner modules available in Natural White and Warm White light colour

Interconnecting cables fitted with CR connectors are available in 3 lengths. These enable breaks in lighting stream without having to run additional power cable. A separate power supply cable is required for each unbroken run of FlexyLED CR modules.

Don't forget! Order LED Drivers separately. 

For each 15W on LED Driver, 3 lineal metres of FlexyLED CR may be run 

eg 30W LED Driver runs up to 6 lineal metres of FlexyLED CR

CR 12Vdc LED Strip Lighting Corner Modules

Domus Line LED Flexible Linear Strip Lighting
Made in Italy to comply with Australian/New Zealand standards
Suitable for surface and embedded installation
Fully compatible with Domus Line 12v DC sensors switches and power supplies
Flexible strip with highly reflective white backing
3M adhesive backing tape for fast installation on virtually any smooth surface
Durable against moderate mechanical shock thanks to a transparent resin coating
FlexyLED CR provides a universal strip lighting system without need for soldering equipment
IP44 protected against water splashes
High performance LED chip with 87lm/W
Innovative quick plug system allows units of different lengths and 90° corners to be joined together to suit almost any situation
Connection system ensure consistency in spacing between individual LED chips, even at joins, to maintain consistent light projection and no shadowed areas
Modules can be cut every 50mm allowing you to custom build your installation

FlexyLED CR modules (strips) 60 LEDs / 4.8W per metre
FlexyLED CR corner modules 6 LEDs, 0.48W
FlexyLED CR modules available in 4 lengths: 250mm, 500mm, 1000mm, 2000mm
FlexyLED CR corner modules available in Left Hand and Right Hand options
FlexyLED CR stips and corner modules available in Natural White and Warm White light colour
Interconnecting cables fitted with CR connectors are available in 3 lengths. These enable breaks in lighting stream without having to run additional power cable.
A separate power supply cable is required for each unbroken run of FlexyLED CR modules.
Don't forget! LED Drivers to be ordered separately. 

For each 15W on LED Driver, 3 lineal metres of FlexyLED CR may be run 

eg 30W LED Driver runs up to 6 lineal metres of FlexyLED CR

CR 12Vdc LED Strip Lighting Interconnector & Cables

Domus Line Interconnector Cables for LED Flexible Linear Strip Lighting
Made in Italy to comply with Australian/New Zealand standards
Connects between two lengths of FlexyLED CR strips
Allows breaks in lighting stream without having to run additional power supply cable
Example: installing FlexyLED CR strips either side of a range hood 
Fitted with CR connectors
Available in 3 lengths: 250mm, 500mm, 1000mm