Domus Line LED Flexible Linear Strip Lighting Made in Italy to comply with Australian/New Zealand standards Suitable for surface and embedded installation Fully compatible with Domus Line 12v DC sensors switches and power supplies Flexible strip with highly reflective white backing 3M adhesive backing tape for fast installation on virtually any smooth surface Durable against moderate mechanical shock thanks to a transparent resin coating FlexyLED CR provides a universal strip lighting system without need for soldering equipment IP44 protected against water splashes High performance LED chip with 87lm/W Innovative quick plug system allows units of different lengths and 90° corners to be joined together to suit almost any situation Connection system ensure consistency in spacing between individual LED chips, even at joins, to maintain consistent light projection and no shadowed areas Modules can be cut every 50mm allowing you to custom build your installation
FlexyLED CR modules (strips) 60 LEDs / 4.8W per metre FlexyLED CR corner modules 6 LEDs, 0.48W FlexyLED CR modules available in 4 lengths: 250mm, 500mm, 1000mm, 2000mm FlexyLED CR corner modules available in Left Hand and Right Hand options FlexyLED CR stips and corner modules available in Natural White and Warm White light colour
Interconnecting cables fitted with CR connectors are available in 3 lengths. These enable breaks in lighting stream without having to run additional power cable. A separate power supply cable is required for each unbroken run of FlexyLED CR modules.
Don't forget! Order LED Drivers separately.
For each 15W on LED Driver, 3 lineal metres of FlexyLED CR may be run
eg 30W LED Driver runs up to 6 lineal metres of FlexyLED CR